STATCOM
STATCOM for grid integration in renewable energy plants
Jema provides a complete range of STATCOMs from 1 Mvar to 40 Mvar (increasable using parallel devices), for integration in renewable plant grids.
Significant features
- Two product ranges: LV for power between 1 and 6 Mvar and a multi-level MV system from 10 to 40 Mvar.
- Compact systems up to 40 Mvar in a 40-foot container.
- MMC Systems with integrated redundancy (hot spare).
- Air / water cooling.
- Operating temperature increase up to 50º C.
- Remote monitoring.
Data sheet
Centralised management system for renewable energy plants
Power plant controller
The purpose of the control module is to achieve perfect integration of the plant within the electrical distribution grid and facilitate receiving, executing and following instructions received via the corresponding energy regulation body.
Using advanced and adaptable closed loop control algorithms, it makes it possible for solar facilities to meet the requirements of the grid operator. And it provides the capability to administer and control energy injection into the grid in accordance with various grid codes.
The Power Plant Controller makes it possible to regulate different parameters, for example:
- Dynamic voltage regulation and/or the power factor regulation of a solar plant at the POI (point of interconnection).
- Power limiting.
- Power injection ramp speed and power reduction controls.
- Frequency control.
- Start-up and stop control.
Main features
- It can communicate with the following devices:
- Metering cell: electric parameters in the plant sub-station.
- BESS system, transformer, switch gear and other devices.
- Communication with converters via Ethernet TCP/IP.
- The module can have a web-based monitoring and control system that lets users:
- Monitor the status of the instructions received by the grid operator and the execution status of the instructions.
- Overview of the current status of the commands.
- Automatic or manual execution of commands received.
- Can execute local instructions.
- History of commands received and executed.
- Control panel with current production data.
- Can export data to CSV files for analysis.
BESS (Battery Storage)
Smart grids are the key for developing renewable energy technology, integrating electric vehicles and improving the efficiency of electric energy efficiency. Consequently, that means drawing attention to a new electrical grid concept consisting of a grid that’s transformed, in terms of both transmission and distribution, using bi-directional communications systems. Furthermore, the concept itself includes several applications that improve the capacity to supervise and monitor power grids. Storage systems that provide stability to the grid and thus increase the penetration of renewable energy come to the fore in smart grids.
Jema can help you develop solutions for a wide range of applications and it can study battery types and appropriate generation sources for every situation and site.
Solutions:
- Time shifting for renewable energy.
- Energy storage systems for stabilising the intermittent generation of renewable energy sources.
- Emergency back-up system in the event of a grid outage.
- Grid services providing frequency and voltage regulation and dynamic voltage support.
- Solar Fuel saver.
Medium voltage turnkey solutions
Jema provides turnkey solutions perfectly adapted to large solar facilities with a wide range of power spanning from 500 kW to 5.6 MW. The SI Box makes it possible to lower transport, installation and commissioning costs. Turnkey solar conversion centres up to 5.6 MW of power are housing medium voltage conversion and transformers equipment adapted to environmental and temperature conditions for every solar plant. The centres include the following elements: Options:
Main features
- Up to 5.6 MW rated power.
- 1000 V and 1500 V Solutions.
- Voltage up to 36 kV.
- Built with a metal or concrete container or metal structure.
- Factory tested plug & play systems.
- Maritime transportation certification (ship container).
1500 V Central solar inverter (IFX6 2c and IFX6 3c)
IFX6 range solar inverter
1500 Vdc Central inverters from 1400 kW to 2550 kW of power
Range of devices with 1500 V DC input designed for reliable installation with an efficient and smart climate management system.
- Redundant equipment increasing plant reliability.
- Capable of reactive management that adapts to the strictest grid codes.
- Smart inverters with injection capacity in off grid or on grid mode.
- Exterior accessibility for basic maintenance tasks without stopping the device.
Main features
- Modular systems, increase availability in the facilities and high performance at low power, master/slave.
- Specific design for high temperatures up to 50º C with low auxiliary consumption.
- Outdoor system with filter adaptations for arid environments.
- Redundant ventilation system.
- Control and follow through: RS485 MODBUS serial communications and open protocols that can control inverters remotely and regulate P, Q and power factor.
- Complies with the strictest grid codes.
- High capacity for providing reactive energy.
- Helps grid quality using the vectorial modulation system (SVM).
- Highly precise calculations with a latest generation 32-bit microprocessor with floating point arithmetic capability.
Proyectos relacionados
IFX2 and IFX3 range solar inverter
IFX2 and IFX3 range solar inverter
Central inverters from 500 kW to 1.2 MW of power
The central solar inverters developed by JEMA are designed and built to maximise the performance of solar power plants and minimise operation and maintenance costs to lengthen the useful life of the equipment.
- Redundant equipment increasing plant reliability
- Capable of reactive management that adapts to the strictest grid codes
- Smart inverters with injection capacity in off grid or on grid mode
- Reduced maintenance operations
Data sheets
Main features
- Modular systems, increase availability: IFX2 (2 modules), IFX3 (3 modules).
- master/slave configuration with high performance at low voltage,.
- Specific design for high temperatures up to 50º C without derating
- Control and follow through: RS485 MODBUS serial communications and open protocols that can control inverters remotely and regulate P, Q and power factor.
- Complies with the strictest grid codes
- High capacity for providing reactive energy
- High reliability Inverters tested under extreme conditions
- Indoor and outdoor systems
- Anti-islanding with automatic disconnection.
- Helps grid quality using the vectorial modulation system (SVM).
- Highly precise calculations with a latest generation 32-bit microprocessor with floating point arithmetic capability.
- Harmonics filtering capacity up to range 7.
Proyectos relacionados
Latest news
We talk to Victor León, Business Development Manager at Jema México30 April, 2021 - 4:10 pm
9 differences between a Battery Charger (BESS) and a PV inverter30 April, 2021 - 3:56 pm
Jema launches electric traction systems for electric buses and trucks14 March, 2021 - 12:29 pm
ISO 15118: CHARGING PROCESS9 March, 2021 - 9:12 am
