Keypad for driver interaction with the vehicle.

Significant features:

• 3 CAN J1939 Protocol for integrating with the rest of the vehicle’s electronics.
• Reduces cabling.
• Key functions are parametrised using software.

ECUs for HVAC in the bus with dual zone temperature: driver and passenger.

Significant features:

• Driver ECU with a display for managing dual zone climate control and managing the driver area.
• Passenger ECU for managing the aisle area.
• CAN J1939 Protocol for integrating the driver ECU with the vehicle CAN.
• Own CAN protocol for internal communication between the driver and passenger ECUs.
• Reprogramming with USB.
• Data logger with USB.

Human Machine Interface with a touchscreen to be used by drivers.

Significant features:

• 4 ” Touch screen (7” version available).
• 3 CAN J1939 Ports for integrating with the rest of the vehicle’s electronics.
• Embedded Windows 7.
• 3 USB Ports.
• 1 HDMI Port.
• 1 ETHERNET Port.
• Audio inputs and outputs.
• Digital inputs and outputs.
• Shortcuts keyboard with wheel.
• BOSCH and ACTIA radio operation from the screen and keyboard.
• Hands-free Bluetooth.
• GPS Navigation and GPS output to aisle monitor.
• Climate control operation from the screen and keyboard.
• ON-BOARD diagnostics.
• Camera display on screen with reverse and on driver demand.

Battery Monitoring System for managing slow charging and fast charging batteries (opportunity).

Significant features:

• Modular system consisting of several cards: module level controller, temperature sensor card, battery pack level controller, voltage measurement card and battery pack current measurement card.
• Cell, module and pack voltage measurement.
• Module temperature measurement using 8 sensors per module.
• Module voltage balancing.
• Estimators: SoC (State of Charge), SoH (State of Health), SoF (State of Function).
• Parametrisation and event memory.
• Own CAN and CAN H1939 communication.
• Alarm management.
• Pack current measurement.
• Insulation measurement.
• Pack temperature and humidity measurement.
• Contacts management.
• Module diagnostics.

These strips let users configure the colour of the lighting using a palette of colours.

Significant features

• Two kinds of LEDs: RGB for providing colour and white for providing intensity.
• ECU Control Light for managing the colour of the strips where 2+2 LED strips can be controlled with the same colour or 2 LED strips with different colours can be controlled.
• Colour configuration from an HMI through CAN communication.

These ECUS use a touch screen, mainly for turning on reading lights in the bus seats.

Significant features:

• Style completely personalised to the client’s needs.
• LIN Communication with the central lighting node that reduces cabling.
• Plug and play without having to configure communications addresses.

Platform Device Control Unit for managing the automatic synchronised opening and closing of train doors.

Significant features:

• Can activate 2 motors at the same time.
• Can activate motors with or without brushes (Brushless).
• EN50155-SIL2.
• Presence detector.
• Entrapment prevention system.

This ECU manages the lighting in the passenger cabin of the bus.

Significant features:

• Mange the intensity of light with a PWM.
• Digital inputs and outputs.
• Two communication ports: CAN J1939 and LIN.